Hybrid DPWM implementation using coarse and fine programmable ADLL

In the paper we propose a novel architecture and implementation of 11-bit Digital Pulse Width Modulator (DPWM) circuit based on previously known building blocks. Linearized Class-AD Double-sided (LADD) algorithm has been used to calculate the DPWM signals of the 11-bit resolution hybrid DPWM for a Class-AD digital audio amplifier. Noise-shaping process is used to support high fidelity with practical values of time resolution. The proposed DPWM circuit is composed of 8-bit counter and Analog Delay Locked Loop (ADLL) using 4-bit tapped delay line. A dual ADLL employing coarse and fine programmable delay element is used to adjust the delay time of delay line and lock it to required time. The coarse- as well as fine-delay lines are implemented as a cascade of variable-delay elements based on shunt capacitor delay element or single-ended Schmitt trigger. The proposed 11-bit DPWM circuit, at a switching frequency of 352.8 kHz and clock generator frequency of 90.3 MHz allows us to attain SNR of 120 dB and THD of the output signal less than 0.1% within the audio baseband and modulation index M=0.95. Basic verification of circuit manufacturability and simulation results (Monte Carlo analysis) for real CMOS process are presented.     

Ortho‐ vs Bay‐Functionalization: A Comparative Study on Tetracyano‐Terrylenediimides

In this paper n‐type semiconductors synthesized via selective fourfold cyanation of the ortho‐ and bay‐positions (2,5,10,13‐ and 1,6,9,14‐positions respectively) of teyrrylenediimides are reported. A detailed study about the impact of the diverse functionalization topologies on the optoelectronic properties, self‐organization from solution, solid‐state packing, and charge carrier transport in field‐effect transistors is presented. The ortho‐substitution preserves the planarity of the core and favors high order in solution processed films. However, the strong intermolecular interactions lead to a microstructure with large aggregates and pronounced grain boundaries which lower the charge carrier transport in transistors. In contrast, the well‐soluble bay‐functionalized terrylenediimide forms only disordered films which surprisingly result in n‐type average mobilities of 0.17 cm²/Vs after drop‐casting with similar values in air. Processing by solvent vapor diffusion enhances the transport to 0.65 cm²/Vs by slight improvement of the order and surface arrangement of the molecules. This mobility is comparable to highest n‐type conductivities measured for solution processed PDI derivatives demonstrating the high potential of TDI‐based semiconductors.     

New Insights into Red Blood Cell Microcytosis upon mTOR Inhibitor Administration

The aim of this study was to evaluate the effect of everolimus, a mammalian target of rapamycin (mTOR) inhibitor, on red blood cell parameters in the context of iron homeostasis in patients with tuberous sclerosis complex (TSC) and evaluate its effect on cell size in vitro. Everolimus has a significant impact on red blood cell parameters in patients with TSC. The most common alteration was microcytosis. The mean MCV value decreased by 9.2%, 12%, and 11.8% after 3, 6, and 12 months of everolimus treatment. The iron level declined during the first 3 months, and human soluble transferrin receptor concentration increased during 6 months of therapy. The size of K562 cells decreased when cultured in the presence of 5 μM everolimus by approximately 8%. The addition of hemin to the cell culture with 5 μM everolimus did not prevent any decrease in cell size. The stage of erythroid maturation did not affect the response to everolimus. Our results showed that the mTOR inhibitor everolimus caused red blood cell microcytosis in vivo and in vitro. This effect is not clearly related to a deficit of iron and erythroid maturation. This observation confirms that mTOR signaling plays a complex role in the control of cell size.     

Covalent attachment of single-stranded DNA to carbon paste electrode modified by activated carboxyl groups

A new method of the electrode modification and DNA immobilization for a biosensor is reported. Outer layer of a conventional carbon paste electrode (CPE) was modified with carboxyl groups by mixing stearic acid with the paste. Single-stranded deoxyribonucleic acid was attached to the modified electrode through a linker - ethylenediamine. Immobilization process was performed in the presence of activators - water soluble 1-ethyl-3(3′-dimethylaminopropyl)-carbodiimide (EDC) and N-hydroxysulfosuccinimide (NHS). Stearic acid concentration and other experimental parameters of the procedure were optimized. Covalent immobilization of DNA on the electrode surface exhibits some advantages as compared to simple adsorption mainly due to the fact that nucleic acid chains are bound to an electrode surface by one end only and it ensures structural flexibility and increases hybridization without DNA leakage. Modified electrode with immobilized (21-mer) oligonucleotide as a specific probe was successfully applied in preliminary investigations for the detection of bar gene commonly used in genetically modified food.     

High molecular arborescent polyoxyethylene with hydroxyl containing shell

Arborescent polyoxyethylene of high molar mass (2×10⁵ g/mol) and narrow molar mass distribution was synthesized in a three-stage process. In the first stage a triblock copolymer of ethylene oxide (central block, DP ca. 90) and 2,3-epoxypropanol-1 (short flanking blocks, DP ca. 5) was synthesized. The potassium alcoholate derived from this copolymer was used to initiate the polymerization of ethylene oxide and the subsequent addition of protected glycidol (1-etoxyethyl glycidyl ether). After deprotection the short polyglycidol blocks were used as branching units for the next generation. Repeated step by step process leads to the ‘pom-pom like’ branched polyoxyethylene macromolecules enriched with the reactive hydroxyl groups in the outer shell. The branched structure of the obtained polymers was evidenced by the size exclusion chromatography and NMR spectroscopy.     

Study of the thermal stability of phases in the Mg-Al system

A part of the Al-Mg phase diagram was studied in the range of composition between 48 and 61 at.% Al by DSC and SEM/EDS methods. The temperature ranges of stability of the β, γ, and ɛ phases were considered. It was found that the congruent melting temperature of the β phase was 450±1 °C. The Al content in that phase was determined to be 61±1 at.% Al at 420 °C. The upper temperature limit of the stability of the ɛ phase was established to be 427±1 °C. The Al content changed from 54 at.% at 390 °C to 56 at.% at 420 °C. The lower temperature limit of the ɛ phase formation was not determined, as a result of a slow ɛ=β+γ reaction. The hypothetical λ or ζ phases were not found, but it was observed that decomposition of oxides might produce extra thermal effects.     

Coupling monolayers for protection of microelectronic circuits

Two polymeric coatings, a silicone gel (Dow Corning 6646) and an epoxy resin (Dexter FP 4402), were glob-top coated onto representative microelectronic circuits, AT&T Triple Track Testers (TTTs), and subjected to the Pressure Cooker Test (PCT). Coupling monolayers were self- assembled on the TTTs prior to encapsulation to improve the moisture protection capabilities of the coatings. Leakage current measurements were made to evaluate the effect of applied monolayers on the moisture protection capability. The moisture protection capability was assessed in short-term and long-term leakage current measurements. MHDA (16-mercaptohexadecanoic acid) and APS (gamma-aminopropyltriethoxysilane) monolayers, in combination with silicone gel and epoxy resin respectively, exhibited very good moisture protection performance.     

Werner-type metal complexes of potato starch

It was shown that potato starch formed Werner‐type complexes. In these complexes a metal atom is ligated by the lone electron pairs of hydroxyl groups from d ‐glucose units and phosphate groups in starch. Acetate, chloride and nitrate were counter‐ions to the transition metal atoms. The metal cations bound preferentially to the phosphoric acid moiety of amylopectin, but secondarily they were co‐ordinated by the hydroxyl groups of the d ‐glucose units. This resulted in the formation of clathrate cages in which a significant number of the water molecules were trapped. Such structures were able to co‐ordinate further metal cations. Only Mn(II) and Co(II) ions, with acetate counter‐ions, neither formed clathrate cages nor were co‐ordinated by the hydroxyl groups of the d ‐glucose of starch.     

On the Consistency of the Normalized Eight-Point Algorithm

A recently proposed argument to explain the improved performance of the eight-point algorithm that results from using normalized data (Chojnacki, W., et al. in IEEE Trans. Pattern Anal. Mach. Intell. 25(9):1172–1177, 2003) relies upon adoption of a certain model for statistical data distribution. Under this model, the cost function that underlies the algorithm operating on the normalized data is statistically more advantageous than the cost function that underpins the algorithm using unnormalized data. Here we extend this explanation by introducing a more refined, structured model for data distribution. Under the extended model, the normalized eight-point algorithm turns out to be approximately consistent in a statistical sense. The proposed extension provides a link between the existing statistical rationalization of the normalized eight-point algorithm and the approach of Mühlich and Mester for enhancing total least squares estimation methods via equilibration. The paper forms part of a wider effort to rationalize and interrelate foundational methods in vision parameter estimation.     

Positive real control of two-dimensional systems: Roesser models and linear repetitive processes

This paper considers the problem of positive real control for two-dimensional (2-D) discrete systems described by the Roesser model and also discrete linear repetitive processes, which are another distinct sub-class of 2-D linear systems of both systems theoretic and applications interest. The purpose of this paper is to design a dynamic output feedback controller such that the resulting closed-loop system is asymptotically stable and the closed-loop system transfer function from the disturbance to the controlled output is extended strictly positive real. We first establish a version of positive realness for 2-D discrete systems described by the Roesser state space model, then a sufficient condition for the existence of the desired output feedback controllers is obtained in terms of four LMIs. When these LMIs are feasible, an explicit parameterization of the desired output feedback controllers is given. We then apply a similar approach to discrete linear repetitive processes represented in their equivalent 1-D state-space form. Finally, we provide numerical examples to demonstrate the applicability of the approach.